 |
  |
NO. 156BT-4 (-12) OR (-18)
OR (-24)-A THROUGH ROOF CONNECTOR FOR USE WHERE DOWNLEAD CABLES ARE
TERMINATED ABOVE THE ROOF DECK AND UNDER THE FINISHED ROOF AND INSULATION.
THE FLAT SURFACE BASE IS SECURED TO THE DECK. THE 1/2" DIAMETER RISER BAR
HAS AN INTEGRAL 1" PVC SLEEVE FOR USE WITH "BOOT TYPE" FLASHINGS. THE PREMIUM
DIE CAST CONNECTORS ACCEPT CONDUCTORS THROUGH NO. 506. RISER LENGTHS
ARE 12", 18" OR 24" DENOTED -( ) AT THE END OF THE PART NUMBER.
NO. A156BT-4 (-12) OR (-18) OR (-24)-AS ABOVE IN ALUMINUM FOR CABLES THROUGH NO. A37. NOTE: FOR BIMETAL USE WITH ALUMINUM CLAMP AT TOP, STAINLESS STEEL RISER, AND BRONZE BASE, ADD THE LETTER "B" IN FRONT OF THE FIRST HYPHEN IN THE CATALOG NUMBER (i.e. 156BT B -4-12 ETC.) |
NO. 156P-4 (-12) OR (-18) OR
(-24)-THIS THROUGH ROOF ASSEMBLY IS SIMILAR TO THE UNIT AT THE LEFT
EXCEPT THAT THE RISER PASSES THROUGH THE ROOF DECK WITH THE DOWNLEAD TERMINATION
BELOW THE ROOF.
NO. A156P-4 (-12) OR (-18) OR (-24)-AS ABOVE IN ALUMINUM. NOTE: FOR BIMETAL USE WITH ALUMINUM CLAMP AT TOP, STAINLESS STEEL RISER BAR, AND BRONZE BASE CONNECTOR ADD THE LETTER "B" IN FRONT FO THE FIRST HYPHEN IN THE CATALOG NUMBER SHOWN ABOVE (i.e. 156PB-4-12 ETC.) |
|
