 |
NO. 229S-A ONE PIECE, HEAVY DUTY, STAINLESS STEEL SPLICER TO JOIN COPPER TO ALUMINUM CABLES UP TO NO. 507/A507. WHEN USED AS A BIMETAL TRANSITION AT DOWNLEAD LOCATIONS, THIS CLAMP MUST BE 18" MINIMUM ABOVE GRADE. CLAMP HAS WATER TIGHT ISOLATOR AT CENTER AND CAN BE USED WITH EITHER END UP. DRAIN HOLES ARE PROVIDED AT BOTH SIDES TO MINIMIZE POTENTIAL CORROSION. STAINLESS STEEL SET SCREWS HAVE ROUNDED ENDS THAT PREVENT CUTTING OF CABLES WHEN TIGHTENED. |
  |
NO. 143-A PREMIUM DIE
CAST CONNECTOR USED FOR CONNECTING SECONDARY BONDING CABLES, NO. 14X THROUGH
NO. 509 TO FULL SIZE CABLES THROUGH NO. 506. THIS CLAMP IS ALSO USED FOR
BONDING REBAR MESH AND FENCE FABRIC OR WIRES.
NO. A143-AS ABOVE IN ALUMINUM FOR SECONDARY CABLE THROUGH NO. A509 TO FULL SIZE CONDUCTORS THROUGH NO. A37. |
 |
NO. 141-THIS STANDARD
1 1/2" LONG PARALLEL CLAMP HAS A PREMIUM DIE CAST CLAMP FOR CABLES THROUGH
NO. 506 OR SOLID ROD UP TO 9/16" IN DIAMETER.
NO. A141-AS ABOVE IN ALUMINUM FOR CABLES THROUGH NO. A37. |
 |
NO. 423B-A PREMIUM DIE
CAST SPLICER FOR CABLES THROUGH NO. 506 OR SOLID RODS UP TO 5/8" DIAMETER.
THIS SUPERIOR GRADE CLAMP IS A FULL 2" LONG AND PROVIDES FOR A WIDE COMBINATION
OF SIZES USING TWO 5/16" STAINLESS STEEL CARRIAGE BOLTS.
NO. A423-AS ABOVE IN ALUMINUM FOR CABLES THROUGH NO. A37. |
