 |
NO. 98-A LEAD COATED CAST
BRONZE CHIMNEY POINT SUPPORT THAT ACCEPTS 3/8" DIAMETER AIR TERMINALS AND
FLUE TILE THICKNESS UP TO 1". SET SCREW FOR MOUNTING IS OF STAINLESS STEEL.
TYPICALLY USED WHERE MASONRY MOUNT SUPPORT CANNOT BE USED ON CHIMNEY AIR
TERMINALS.
NO. 98M-AS ABOVE BUT FOR 1/2" LEAD COATED AIR TERMINALS. NO. A98M-AS ABOVE IN ALUMINUM. |
 |
NO. 90-A MACHINED BRASS
CONNECTOR FOR 3/8" AIR TERMINALS. INTENDED FOR VERTICAL MOUNTING OF 3/8"
"LESS ADAPTER" TYPE AIR TERMINALS AND INCLUDES A STAINLESS STEEL MOUNTING
BOLT AND LEAD EXPANSION ANCHOR. BASE REQUIRES ADDITIONAL SUPPORT ON THE
AIR TERMINAL TO INSURE ADEQUATE SUPPORT.
NO. 90LA-AS ABOVE BUT WITHOUT MOUNTING BOLT AND ANCHOR. NO. 90M-SAME AS NO. 90 BUT FOR 1/2" DIAMETER AIR TERMINALS. NO. A90M-AS ABOVE IN ALUMINUM. |
 |
NO. 100-A CAST BRONZE CONNECTOR
FOR 3/8" AIR TERMINALS. INTENDED FOR VERTICAL MOUNTING OF 3/8" "LESS ADAPTER"
TYPE AIR TERMINALS AND INCLUDES A STAINLESS STEEL MOUNTING BOLT AND LEAD
EXPANSION ANCHOR. BASE REQUIRES ADDITIONAL SUPPORT ON THE AIR TERMINAL
TO INSURE ADEQUATE SUPPORT.
NO. 100M-AS ABOVE FOR 1/2" DIAMETER AIR TERMINALS. NO. A100M-AS ABOVE IN ALUMINUM. |
