 |
NO. 98-A LEAD
COATED CAST BRONZE CHIMNEY POINT SUPPORT THAT ACCEPTS 3/8" DIAMETER AIR
TERMINALS AND FLUE TILE THICKNESS UP TO 1". SET SCREW FOR MOUNTING IS OF
STAINLESS STEEL. TYPICALLY USED WHERE MASONRY MOUNT SUPPORT CANNOT BE USED
ON CHIMNEY AIR TERMINALS.
NO. 98M-AS ABOVE BUT FOR 1/2" LEAD COATED AIR TERMINALS. NO. A98M-AS ABOVE IN ALUMINUM. |
 |
NO. 184-THIS CAST BRONZE
CABLE SUPPORT IS DESIGNED TO SECURE MAIN SIZE CABLES THROUGH NO. 506 TO
CONCRETE SILO BANDS UP TO 5/8" DIAMETER WITHOUT DRILLING OR USING SEPARATE
FASTENERS.
NO. A184-AS ABOVE IN ALUMINUM FOR CABLES THROUGH NO. A37. |
 |
NO. 183-THIS IS A CAST
BRONZE ECONOMY VERSION OF NO. 184. THIS FASTENER ACCEPTS THE SAME SIZE
CABLES AND IS SECURED BY DRIVING IT BEHIND THE SILO BANDS RATHER THAN CLAMPING
TO THEM.
NO. A183-AS ABOVE IN ALUMINUM. |
 |
NO. 324-A CAST BRONZE,
DRIVE TYPE ATTACHMENT FOR FASTENING FULL SIZE CABLE ON TREE INSTALLATIONS.
USE PRE-DRILLED PILOT HOLE ON HARDWOOD TREES.
NO. 324M-AS ABOVE EXCEPT FOR MINIATURE CABLE AT BRANCH POINTS. |
 |
NO. 731-G-ONE GALLON "CONSTRUCTION MASTIC" FOR
USE ON ASPHALT BASED OR METAL ROOFS. NO. 731-Q DENOTES THE 29 OZ.
TUBE
NOTE: IF ROOF IS SINGLE MEMBRANE TYPE, I.E., PVC, EPDM, THERMOPLASTIC, ETC., SPECIAL ADHESIVES COMPATIBLE WITH THE ROOF MATERIAL MUST BE USED. NOTE: IT IS VERY IMPORTANT TO SELECT AN ADHESIVE THAT IS COMPATIBLE WITH THE ROOFING SYSTEM IN USE. A WIDE VARIETY OF ADHESIVES ARE AVAILABLE IN GALLON CANS OR 29 OZ. OR 10 OZ. TUBES. (PACKAGE SIZE VARIES BY BRAND.) ONE GALLON IS USUALLY REQUIRED FOR 50 AIR TERMINAL BASES OR 100 CABLE HOLDERS. |
