 |
NO. 79-A FOUR LEG ADJUSTABLE
BASE FOR MOUNTING AT CONE-SHAPE OR ROUNDED VENTS OR MECHANICAL EQUIPMENT,
ETC. CAST BRONZE CABLE CLAMP IS FOR ADAPTER TYPE AIR TERMINALS AND FITS
CABLES THROUGH NO. 506.
NO. A79-AS ABOVE IN ALUMINUM FOR CABLES THROUGH NO. A37. |
 |
NO. 75-A 2" WIDE COPPER
SADDLE FOR TILE OR SLATE ROOF RIDGES. SADDLE ENDS ARE FIELD FORMED TO HOOK
UNDER BOTH SIDES OF RIDGE WITH 2 DRAW BOLTS TO PROVIDE FINAL CLAMPING TENSION.
NO NAILS OR SCREWS ARE REQUIRED TO SECURE THIS BASE. BASE INCLUDES A CAST
CRIMP TYPE CABLE CONNECTION FOR CONDUCTORS THROUGH NO. 506. POINT STUD
ACCEPTS ALL ADAPTER TYPE AIR TERMINALS.
NO. A75-AS ABOVE IN ALUMINUM FOR CABLES THROUGH NO. A37. |
 |
NO. 188-A 1" WIDE STRAP
CABLE HOLDER DESIGNED FOR USE ON SLATE OR TILE ROOFS. INSTALLED BY SLIDING
STRAP UP UNDER SLATE/TILE AND HOOKING IT TO THE ROOFING SUPPORT FASTENERS.
ACCEPTS CABLE THROUGH NO. 506.
NO. A188-AS ABOVE IN ALUMINUM FOR CABLES THROUGH NO. A37. |
 |
NO. 187-A 1" WIDE, 19"
LONG STRAP CABLE HOLDER INTENDED FOR USE AT SLATE OR TILE RIDGES. STRAP
ENDS ARE FIELD FORMED TO ACCOMMODATE RIDGE WIDTH AND SECURED WITH A STAINLESS
STEEL DRAW BOLT. CLIP ACCEPTS ALL CONDUCTORS THROUGH NO. 506.
NO. A187-AS ABOVE IN ALUMINUM FOR CABLES THROUGH NO. A37. |
