 |
NO. 68-BRASS ADAPTER TO ENGAGE 3/8" SOLID ROD POINTS TO STUD TYPE BASES. |
 |
NO. 69-BRASS ADAPTER TO ENGAGE 1/2" SOLID ROD POINTS TO STUD TYPE BASES. | |
 |
NO. 670-BRASS ADAPTER TO ENGAGE 5/8" SOLID ROD POINTS TO STUD TYPE BASES. |
 |
NO. 27-A HINGED SWIVEL CONNECTOR DESIGNED SO THAT A POINT MAY BE SET PERPENDICULAR ON A SLOPING ROOF. THE LOWER SECTION FITS ALL BASES WITH EXTERNAL STUDS AND THE UPPER SECTION FITS ALL ADAPTER TYPE POINTS. STAINLESS STEEL SET SCREWS ASSURE A PERMANENT LOCK BETWEEN THE POINT AND THE BASE. | |
 |
NO. 28-A RISER ADAPTER FOR ALL ADAPTER TYPE POINTS TO 3/8" DIAMETER RISER BARS. |
 |
NO. 28M-A RISER ADAPTER
FOR ALL ADAPTER TYPE POINTS TO 1/2" DIAMETER RISER BARS.
NO. A28M- AS ABOVE IN ALUMINUM. |
|
 |
NO. 28D-A BRASS ADAPTER
FOR USE IN COMBINING SOLID OR TUBULAR ADAPTER TYPE POINTS WITH
1/2" INTERNAL THREAD BASES.
NO. A28D-AS ABOVE IN ALUMINUM |
 |
NO. 28DE-SAME AS NO. 28D
BUT HAS A 1/2" -13 X 11//8" LONG MALE STUD
NO. A28DE-AS ABOVE IN ALUMINUM |
|
 |
NO. 27M-A BRASS EXTENSION ADAPTER FOR ALL STANDARD BASES AND POINTS. THIS UNIT GIVES 13/4" EXTENSION. LONGER LENGTHS AVAILABLE UPON REQUEST. | |||
