 |
NO. 607-A 3 GROOVE PARALLEL
CLAMP WHICH CAN BE USED TO CONNECT TWO CABLES THROUGH NO. 506 TO A 1/2"
ROD, POINT, OR ANOTHER CABLE.
NO. A607-AS ABOVE IN ALUMINUM FOR CABLE SIZES THROUGH NO. A37. NO. 608-SAME AS NO. 607 EXCEPT FOR 5/8" ROD OR POINT. NO. A608-AS ABOVE IN ALUMINUM. |
 |
NO. 706X-A HEAVY DUTY,
DOUBLE CAP TEE SPLICER OF CAST BRONZE FOR NO. 507 AND 250MCM CABLES. EACH
CABLE IS SECURED BY A PRESSURE TYPE CLAMP WITH 2" OF CONTACT LENGTH.
NO. A706X-AS ABOVE IN ALUMINUM FOR NO. A507 CABLE |
  |
NO. 229S-A ONE PIECE HEAVY DUTY STAINLESS STEEL SPLICER TO JOIN COPPER TO ALUMINUM CABLES. CABLE SIZE RANGE UP TO NO. 507/A507. WHEN USED AS A BI-METAL TRANSITION AT DOWNLEAD LOCATIONS, THIS CLAMP MUST BE 18" MINIMUM ABOVE GRADE. CLAMP HAS WATER TIGHT ISOLATOR AT CENTER AND CAN BE USED WITH EITHER END UP. DRAIN HOLES ARE PROVIDED AT BOTH SIDES TO MINIMIZE POTENTIAL CORROSION. STAINLESS STEEL SET SCREWS HAVE ROUNDED ENDS THAT PREVENT CUTTING OF CABLES WHEN TIGHTENED. |
 |
NO. 430B-A U-BOLT PARALLEL
CLAMP OF CAST BRONZE USED FOR A PARALLEL CONNECTION FROM EITHER ONE OR
TWO CABLES OR RODS THROUGH 5/8" DIAMETER TO ANOTHER CABLE OR ROD. U-BOLT,
NUTS AND WASHERS ARE STAINLESS STEEL.
NO. A430-AS ABOVE IN ALUMINUM. |
