 |
NO. 7302-A
STAMPED CABLE HOLDER SECURED WITH ADHESIVE OF FLAT ROOFS. THE ROLLED
EDGE AND BREAKAWAY TABS ARE DESIGNED TO PROTECT ROOF SURFACES. ACCEPTS
ALL CABLES THROUGH NO. 507.
NO. A730-AS ABOVE IN ALUMINUM FOR CABLES THROUGH NO. A507. |
 |
NO. 731-G-ONE GALLON "CONSTRUCTION
MASTIC" FOR USE ON ASPHALT BASED OR METAL ROOFS. NO. 731-Q DENOTES
THE 29 OZ. TUBE.
NOTE: IF ROOF IS SINGLE MEMBRANE TYPE, I.E., PVC, EPDM, THERMOPLASTIC, ETC., SPECIAL ADHESIVES COMPATIBLE WITH THE ROOF MATERIAL MUST BE USED. NOTE: IT IS VERY IMPORTANT TO SELECT AND ADHESIVE THAT IS COMPATIBLE WITH THE ROOFING SYSTEM IN USE. A WIDE VARIETY OF ADHESIVES ARE AVAILABLE IN GALLON CANS OR 29 OZ. OR 10 0Z. TUBES. (PACKAGE SIZE VARIES BY BRAND.) ONE GALLON IS USUALLY REQUIRED FOR 50 AIR TERMINAL BASES OR 100 CABLE HOLDERS. |
 |
NO. 166-24A
5/8"WIDE COPPER CABLE SUPPORT LOOP FOR USE WITH MAIN SIZE CABLES THROUGH
NO. 506. LOOP IS PREFORMED FOR EASE OF INSTALLATION AND IS SECURED
WITH FASTENERS OF 1/4"MAXIMUM DIAMETER.
NO. A166-AS ABOVE IN ALUMINUM FOR CABLES THROUGH NO. A37. NO. 165-A 1/2"WIDE COPPER LOOP SIMILAR TO ABOVE. MOUNTING HOLES ARE FOR NAILS OR SCREWS NOT LARGER THAN 1/8"IN DIAMETER. NO. A165-AS ABOVE IN ALUMINUM. |
